施工測量方案.doc

目                      錄
1編制依據 1
2工程概況 1
3施工部署 2
3.1施測程序 2
3.2施工測量組織工作 2
4施工測量的基本要求 2
4.1施測原則 2
4.2準備工作 3
4.3測量的基本要求 4
5工程定位與控制網測設 4
5.1工程定位 4
5.2平面控制網測設 4
5.3高程控制網的布設 6
6基礎測量 8
6.1基礎平面軸線投測方法 8
6.2士0.000以下部分標高控制 9
7主體結構施工測量 10
7.1平面控制網的測設 10
7.2激光經緯儀選型 11
7.3基準線豎向投測方法及技術要求 11
7.4標高豎向傳遞 13
8工程重點部位的測量控制方法 13
8.1 建筑物大角鉛直度的控制 13
8.2墻、柱施工精度測量控制方法 14
8.3 門、窗洞口測量控制方法 14
8.4 電梯井施工測量控制方法 14
9質量保證措施 15
10施測安全及儀器管理 16

1編制依據
CONTENTS
1 prepared according to a
2 Project Overview 1
3 Construction of the deployment of 2
3.1 The experimental procedure 2
Measured 3.2 Construction work of the Organization 2
4, 2 basic requirements for construction survey
Surveying 4.1 Principle 2
4.2 The preparation of 3
4.3 Measurement of the basic requirements of 4
5, positioning and control of network engineering survey and design 4
5.1 Project Location 4
5.2 Surveying 4 horizontal control network
5.3 Height Control Network 6
6 of 8 basic measurement
6.1 Investment and measuring method based on 8-plane axis
6.2 ± 0.000 9 the following section elevation control
Construction Survey and 10 7 of the main
7.1 Measurement of horizontal control network of 10
11 7.2 Selection of laser theodolite
7.3 Measurement of Vertical baseline methods and technical requirements 11
Vertical transmission of 13 7.4 elevation
8 projects in key areas of measurement control 13
8.1 Building 13 Tai Kok vertical degree of control
8.2 wall, construction of precision measurement control column 14
8.3, window openings measure and control methods 14
8.4 Control of elevator shaft 14 Construction Survey
9 Quality assurance measures 15
Surveying 10 of 16 safety and equipment management

A basis for preparing
 

前往下載